Siku
Browse Sub-Categories... View all products within Siku
10 Pallets 1:50
Set of 10 pallets.
Approx. Size (each): 4 x 3 x 0.5 cm
Scale: 1:50
10 Round Bales 1:32
10 round hay bales.
Pack contains 5 x yellow/golden bales and 5 x white bales.
Made from plastic.
Assorted Bales
These Assorted Bales can be played with on any 1:32 scale trailer. You get the round and the square, wrapped and unwrapped.
Measurements:
4 x 4 x 3cm
Made of diecast metal and plastic
Scale: 1:32
Bale Trailer & Bales 1:32
A trailer for hauling all the bales in from the fields.
27 x 9 x 10 cm Scale 1:32
Made of die-cast metal & plastic.
Fits all our 1:32 scale tractors.
Note: The bales are slightly smaller than our Britains 1:32 scale round bales.
Cattle Trailer & Cows 1:32
This cattle trailer is ideal for taking your cattle to market, or just moving them around the farm.
It comes complete with a ramp with safety rails that can be lowered to allow the two fresian cows - that are included- on board.
Fits onto the back of all our 1:32 scale Land Rovers (except the Series 1) and tractors.
Approx size: 19 x 7.5 x 10 cm
Claas Ares Tractor 1:32
A Claas Ares 697 tractor in the 1:32 scale. Diecast metal and plastic.
Complete with front and rear hitches, steering that can be operated with the drivers cab still in place and opening bonnet.
Approximate dimensions: 17 x 7 x 10 cm
Suitable for next day express delivery.
Claas Axion 850 Radio Controlled Tractor 1:32
Well detailed die cast metal Claas Axion 850 2.4 GHz radio controlled tractor.
There are lots of features including proportional speed and steering functions, front and rear lights that are permanently switched on during operation plus a newly designed handset.
Approx size: 20 x 11 x 9.5 cm
Claas Combine Harvester 1:50
The Claas Combine Harvester 1:50 is a key machine on a farm in the spring time, because it picks the wheat from the field and places it into a tractor and trailer. This speeds up wheat picking because it can pick thousands of seeds in an hour.
Measurements:
24 x 18 x 9
Made of diecast metal and plastic.
Scale: 1:50
Claas Tractor 1:50
This Claas Green Tractor 1:50 is one of the many tractors you can use with any 1:50 scale trailers. The farm workhorse.
Measurements:
11 x 7 x 5cm
Made of diecast metal and plastic
Scale: 1:50
Claas Tractor with Frontloader 1:32
The Claas Tractor with Frontloader dose everything another tractor does. But with the front loader you can use it to also move things on to trailers, anything from mud to plant waste.
Measurements: 23 x 7 x 10cm
Die cast metal and plastic detailed model.
Combination Disc Harrow / Cultivator 1:32
The Combination Disc Harrow / Cultivator over turns the soil so the farmer can sow some seeds for his crop. It doesn't just turn over soil it also creates little channels for the seeds to grow in for a smart looking field. It can also fold up for easy transport.
Measurements: 25 x 20 x 4cm
Made of diecast metal and plastic.
Scale: 1:32
Combination Seed Drill 1:32
This is a combination of a seed drill, a disk harrow and a rake. Everything you need to planting the seeds.
It features folding ladder access, folding guides and an opening seed hopper. It can be raised up for travelling along the roads.
Scale 1:32
Made of die cast metal & plastic.
(Tractor not included)
Compact Disc Cultivator 1:32
The Compact Disc Cultivator helps prepare the land/soil for new seeds to be sowed. This gets rid of large stones or clods of soil.
Measurements:
10 x 8 x 4cm
Made of diecast metal and plastic.
Crop Sprayer 1:32
Crop Sprayers are used to apply Pesticides, Herbicides and Fertilisers to crops in fields.
This crop sprayer has extendable arms and can be used with other 1:32 tractors.
Diecast metal and plastic.
Approx size: 22 x 9 x 9 cm
Disc Harrow 1:32
The disc harrow is used in the fields to break up the big lumps of earth and make a fine bed to plant the seeds in. This harrow folds the outer disc sets so that it fits through gateways and long the narrow roads. It has 4 fixed and 4 folding disc sets.
Measurements: 16.7 x 10.5 x 4.8 cm
Made of diecast metal and plastic.
Scale: 1:32
Tractor not included but available separately.
Excavator 1:50
The Excavator can dig any hole you want - for building work, new pipe lines, or even just for trenches. This can fit on almost any flat bed trailer in the 1:50 range.
Measurements:
11 x 5 x 5cm
Made of diecast metal and plastic.
Scale: 1:50
Fendt 939 Radio Controlled Tractor 1:32
A high quality die cast metal and plastic radio controlled Fendt tractor. Easy to operate with the radio control handset. Many detailed features including:
Precise driving and manoeuvring with the 2.4 GHz wavelength radio control handset
Lights at the front and rear permanently switched on during operation
In stand-by mode, i.e. after switching on the model and before connection to the radio-control...
Fendt Tractor 1:50
The Fendt Tractor is one of the many tractors you see on the roads and fields, it can pull any of the trailers in our 1:50 scale range.
Measurements: 13 x 5 x 8cm
Made of diecast metal and plastic
Scale: 1:50
Fendt Tractor with Dual Wheels and Plough 1:50
The largest Fendt tractor combined with a 7-blade plough trailer makes a great toy set to play with.
The plough can be directed to the right and left and has a moving rubber wheel to help provide stability for all ploughing jobs on the carpet!
Approx size: 27 x 7 x 8cm
Fendt Tractor with Frontloader 1:50
This Fendt tractor has a moving frontloader, ideal for loading your trailer and digging in the farmyard.
Measurements: 16 x 6 x 9cm
Made of diecast metal and plastic
Scale: 1:50
Fertiliser Spreader 1:32
Kuhn Axera-H fertiliser spreader which be attached to the hitch of any Siku tractor. The spreader cover can be opened to load it up.
Diecast metal and plastic.
Approximate size: 8 x 5 x 5 cm
Tractor not included.
Fodder Mixing Wagon 1:32
The fodder mixing wagon is used to feed the livestock during the winter months.
This model includes an mixing mechanism and the food comes out the feed hatch on the side.
Scale 1:32
Fits all our 1:32 scale tractors.
Approx measurements: 13 x 23 x 8 cm
Forestry Tractor with Logs 1:32
The Forestry Tractor with Logs picks up logs from the ground and puts them into a trailer. The tractor has protective bars over the top of it so that if anything big hits it, it doesn't get crushed. It includes 4 logs and working steering.
Measurements: 18 x 11 x 9cm
Made of diecast metal and plastic.
Forestry Trailer with Logs 1:50
This forestry trailer is for moving big logs from the trees that have been cut down in the forests and plantations. The arm will swivel 360 degrees and reach down and pick up one log at a time and place it in the trailer. The side guards are to keep the logs as still as possible in transport. There are 6 logs included.
Fits all our 1:50 scale tractors.
Measurements: 15 x 4 x 12cm
Made...
Twitter
Facebook
Our Blog