Toy Tractors & Machinery - Small (1:32)

Children's tractors, combines, Landrovers, trailers and other farm machinery - we have a great selection. These are 1:32 scale with a typical tractor measuring approx 15cm long and 9cm high. We have many Britains Farm Toys, which are brilliant quality diecast metal and should last for years. We also stock Siku, which are very similar to Britains and again are great quality.

All the trailers fit the tractors in this section. We would recommend these for ages 5 upwards although some younger children do enjoy them. For younger childrens see the Toy Tractors & Farm Machinery Large section or the Tractors & Diggers for Toddlers. We also have farms and animals in the same scale - see the Farm Sets & Animals section.

Page: 1 | 2 | 3 | 4 | Next
Sort By:
  • display as grid Grid
  • display as list List
View: 12 | 24 | 48 | ALL
All-Purpose Dispenser Trailer 1:32
All-Purpose Dispenser Trailer 1:32
Three-axle version of the all-purpose dispenser from Strautmann. This high volume tipping trailer is made from die-cast metal and plastic and is mounted on a three-axle chassis. The rear flap and metering valves are movable as are the two highly detailed dispenser plates. Complete with movable support foot on the towing bar. Approx size: 31.5 x 12 x 7 cm
£24.95
Amazone Nova Crop Sprayer 1:32
Amazone Nova Crop Sprayer 1:32
Crop Sprayers are used to apply Pesticides, Herbicides and Fertilisers to crops in fields. This crop sprayer has extendable arms and can be used with other 1:32 tractors. Diecast metal and plastic. Approx size: 22 x 9 x 9 cm  
£13.95
Amazone Seeder 1:32
Amazone Seeder 1:32
A detailed model of the Amazone EDX 6000-T single unit seed drill. High quality die-cast metal and plastic parts. The entire drill unit at the rear can be raised and lowered as well as folded away. With opening seed tank lid. Single axle with rubberised track tyres. Approx size: 23.5 x 19 x 9 cm  
£26.95
Amazone UX 11200 Crop Sprayer 1:32
Amazone UX 11200 Crop Sprayer 1:32
Amazone UX 11200 Crop Sprayer, made from diecast metal and plastic. The crop sprayer has a high capacity twin-axle chassis that guarantees maximum coverage thanks to XL tank dimensions. With foldaway spray arms, which also extend to considerable width, and height-adjustable spray unit as on the original device. The pumps have been reproduced with careful attention to detail, while the dome casing...
£16.50
 
Bale Trailer & Bales 1:32
Bale Trailer & Bales 1:32
A trailer for hauling all the bales in from the fields. 27 x 9 x 10 cm Scale 1:32 Made of die-cast metal & plastic. Fits all our 1:32 scale tractors. Note: The bales are slightly smaller than our Britains 1:32 scale round bales.
£24.55
Cattle Trailer & Cows 1:32
Cattle Trailer & Cows 1:32
This cattle trailer is ideal for taking your cattle to market, or just moving them around the farm. It comes complete with a ramp with safety rails that can be lowered to allow the two fresian cows - that are included- on board. Fits onto the back of all our 1:32 scale Land Rovers (except the Series 1) and tractors. Approx size: 19 x 7.5 x 10 cm  
£18.95
Claas Cargos Trailer 1:32
Claas Cargos Trailer 1:32
A loader wagon from Claas in extra-large format! It is a Cargos 9500 Combi-loading wagon with a plastic tipper trailer mounted on a die-cast metal three-axle body. Just like real-life, this farm model gives the maximum tonnage allowed. It's a mighty trailer that's ideal for the farm! With moving pick-up and rear flap. Plus rotating metering rollers at the rear of the unit. Die cast metal and plastic....
£27.50
Claas Jaguar 960 Forage Harvester 1:32
Claas Jaguar 960 Forage Harvester 1:32
This Claas forage harvester with Orbis 600 maize head has lots of realistic details and functions. The rear axle steering mechanism is operated by a turning wheel on the roof of the combine. There are right and left engine flaps and those at the rear open allowing a great view of the engine detail. The sprung front axle makes for an ultra comfortable ride. There are also folding mirrors. The Orbis...
£44.95
 
Claas Lexion Combine Harvester with Tracks 1:32
Claas Lexion Combine Harvester with Tracks 1:32
This model Class Lexion 770 combine harvester has the latest track tractor technology. Come harvest time, this machine really goes to work! There is lots of realistic detailing on this die cast metal and plastic model. The cutting unit is height-adjustable and removable. For road transport, the cutting unit, fitted with GPS cameras, can be loaded onto the matching trailer and coupled to the combine...
£77.95
Claas Rollant Round Baler 1:32
Claas Rollant Round Baler 1:32
This Claas Rollant 340 Baler is used for making round bales or hay or straw. Includes 2 bales. The back of the baler opens and can hold 1 bale. Approx size: 13 x 8 x 7 cm Please note: not compatible with our packs of Britains round bales.
£18.95
Claas Tractor with Frontloader 1:32
Claas Tractor with Frontloader 1:32
The Claas Tractor with Frontloader dose everything another tractor does. But with the front loader you can use it to also move things on to trailers, anything from mud to plant waste. Measurements: 23 x 7 x 10cm Die cast metal and plastic detailed model.
£23.95
Combination Seed Drill 1:32
Combination Seed Drill 1:32
This is a combination of a seed drill, a disk harrow and a rake. Everything you need to planting the seeds. It features folding ladder access, folding guides and an opening seed hopper. It can be raised up for travelling along the roads. Scale 1:32 Made of die cast metal & plastic. (Tractor not included)  
£18.95
 
Compact Disc Cultivator 1:32
Compact Disc Cultivator 1:32
The Compact Disc Cultivator helps prepare the land/soil for new seeds to be sowed. This gets rid of large stones or clods of soil. Measurements: 10 x 8 x 4cm Made of diecast metal and plastic.
£13.95
Disc Harrow 1:32
Disc Harrow 1:32
The disc harrow is used in the fields to break up the big lumps of earth and make a fine bed to plant the seeds in. This harrow folds the outer disc sets so that it fits through gateways and long the narrow roads. It has 4 fixed and 4 folding disc sets. Measurements: 16.7 x 10.5 x 4.8 cm  Made of diecast metal and plastic. Scale: 1:32 Tractor not included but available separately.   
£8.95
Eurotiger XL 4060 Sugarbeet Harvester 1:32
Eurotiger XL 4060 Sugarbeet Harvester 1:32
This ROPA Eurotiger XL sugarbeet harvester weighs almost 2 kg and is a mega model produced almost exclusively in die-cast metal. This will quite possibly become the undisputed star of every model farm! The sugarbeet harvester can be operated with a folding arm from behind the cabin. A moving conveyor in the rear section folds outward to the side. The grubber blade unit at the front of the machine...
£71.95
Fendt Combine Harvester 9470X
Fendt Combine Harvester 9470X
Detailed die cast model Fendt 9470X combine harvester featuring the latest hybrid technology. The cutting unit is height-adjustable and removable. For road transport, the cutting unit can be loaded onto the trailer and coupled to the combine harvester. The filler pipe is movable and the flaps of the giant corn tank can be opened. The front axle is fitted with suspension and the rear axle can be controlled...
£59.95
 
Fodder Mixing Wagon 1:32
Fodder Mixing Wagon 1:32
The fodder mixing wagon is used to feed the livestock during the winter months. This model includes an mixing mechanism and the food comes out the feed hatch on the side. Scale 1:32 Fits all our 1:32 scale tractors. Approx measurements: 13 x 23 x 8 cm
£20.95
Forestry Tractor with Grabber & Logs 1:32
Forestry Tractor with Grabber & Logs 1:32
The Forestry Tractor with Logs picks up logs from the ground and puts them into a trailer. The tractor has protective bars over the top of it so that if anything big hits it, it doesn't get crushed. It includes 4 logs and working steering.  Measurements:  18 x 11 x 9cm Made of diecast metal and plastic.
£33.50
Green Rear Tipping Trailer 1:32
Green Rear Tipping Trailer 1:32
The Green Rear Tipping Trailer allows you to transport anything you like. It aslo lets you tip the trailer instead of getting a another machine to empty it.  Measurments: 17 x 6 x 7cm Made of diecast metal and plasic.
£15.95
Grimme Ridging Hiller 1:32
Grimme Ridging Hiller 1:32
The Grimme ridge runner is the ideal machine for preparing the ground before sowing the potato crop. This sturdy model has a metal frame and hard-wearing plastic parts. Made from diecast metal and plastic. Attaches to one of our 1:32 scale Siku tractors. Approx size: 10 x 8.5 x 4.5 cm Any questions? Please ask!    
£9.50
 
JCB Midi Excavator 1:32
New
JCB Midi Excavator 1:32
All the best farms have a JCB or two for digging ditches, laying foundations and a multitude of other jobs. This JCB Midi Excavator has a rotating cab plus an arm and bucket that lift and reach in order to scoop up the earth just like the real thing. Die-cast metal and plastic. Scale 1:32.  
£14.50
JCB Tracked Excavator 1:32
New
JCB Tracked Excavator 1:32
All the best farms have a JCB or two for digging ditches, laying foundations and a multitude of other jobs. This JCB Tracked Excavator has a rotating cab plus an arm and bucket that lift and reach in order to scoop up the earth just like the real thing. And of course it has tracks which means it can get to really muddy places without effort. Die-cast metal and plastic. Scale 1:32.  
£19.95
John Deere 3040 Tractor 1:32
John Deere 3040 Tractor 1:32
Made from diecast metal and plastic, this John Deere 3040 tractor has lots of great details. It comes complete with Britains' standard rear towing hitch. Approx length: 16 cm Any questions? Please ask!
£19.95
John Deere 3140 Tractor 1:32
John Deere 3140 Tractor 1:32
John Deere 3140 four wheel drive model tractor. Made from diecast metal and plastic. Complete with rear towing hitch for our 1:32 scale trailers. Approx length of tractor: 16 cm Any questions? Please ask!
£19.95
 
Page: 1 | 2 | 3 | 4 | Next