Toy Tractors & Machinery Small (1:32)
Children's tractors, combines, Landrovers, trailers and other farm machinery - we have a great selection. These are 1:32 scale with a typical tractor measuring approx 15cm long and 9cm high. They are mostly Britains Farm Toys, which are brilliant quality diecast metal and should last for years, with a few trailers from Siku, again great quality. All the trailers fit the tractors in this section. We would recommend these for ages 5 upwards although some younger children do enjoy them. For younger childrens see the Toy Tractors & Farm Machinery Large section or the Tractors & Diggers for Toddlers. We also have farms and animals in the same scale - see the Farm Sets & Animals section.
Bale Trailer & Bales 1:32
A trailer for hauling all the bales in from the fields.
27 x 9 x 10 cm Scale 1:32
Made of die-cast metal & plastic.
Fits all our 1:32 scale tractors.
Note: The bales are slightly smaller than our Britains 1:32 scale round bales.
Bale Trailer 1:32
Ideal for bringing the bales in from the field - this yellow bale trailer has interchangable round and square bale racks, so it can hold either bales. Best with Britains round or big square bales.
Made of die cast metal and plastic.
Measurements: 24 x 8 x 12 cm
Bobcat Skidsteer 1:32
The Bobcat Skidsteer can lift loads straight up - so ideal for tight corners. It has a hydraulic front bucket to raise it up and lower it again. The drivers cage is partially enclosed to protect him from falling obstacles. Free running wheels with authentic tyre tread. Approximate measurements: 12 x 7 x 6 cm
Die cast metal and plastic
Case 1056XL Tractor 1:32
Detailed diecast metal and plastic model Case IH 1056XL tractor.
Lots of features including working steering, towing hitch, realistic tyre treads and much more.
Approximate size: 14 x 9 x 7 cm
Case 350 4WD Steiger 1:32
A Case IH 350 4WD Steiger model tractor.
Well detailed diecast model.
Approximate size: 25 x 12 x 12 cm
Scale: 1:32
Available for next working day express delivery.
Case 4WD Quadtrac 1:32
A Case IH 600 4WD Steiger Quadtrac model tractor.
Well detailed diecast model.
Approximate size: 23 x 12 x 9 cm
Case 600 4WD Steiger 1:32
A Case IH 600 4WD Steiger model tractor.
Well detailed diecast model.
Approximate size: 24 x 12 x 9 cm
Scale: 1:32
Available for next working day express delivery.
Case Combine 1:32
This fabulous red Case Combine Harvester is seen in the fields cutting the crops throughout the summer.
Diecast metal & plastic
Approximate dimensions: 36 x 30 x 16 cm
Case IH Maxxum 110 Tractor with Frontloader 1:32
A fantastic Case IH Maxxum110 Tractor with Frontloader.
This is a great quality diecast and plastic tractor.
Features working steering, adjustable frontloader, rear coupling for attaching 1:32 trailers and a cab which can be removed.
Approximate dimensions: 19 x 7 x 9 cm.
Available for next day delivery.
Case Magnum Tractor 1:32
The Case Magnum tractor is allegedly the most powerful tractor to be made to date. Used for pulling really heavy machinery.
Die cast metal and plastic.
Approximate dimensions: 17 x 9 x 11 cm
Case Puma 225CVX Tractor 1:32
Case IH Puma 225 CVX tractor with steerable front axle via the detachable driver's cab, hazard lights, front and rear lights. Wing mirrors and step ladder into the cab. Rolling wheels with authentic tyre tread.
Front weight and rear hitch compatible with most 1:32 scale farming implements.
Made of die cast metal and plastic.
Approx. size: 20 x 14 x 10.5 cm
Case Steiger Tractor 1:32
This is a bright red model of a Case IH Steiger 535 Tractor made by Britains. It has working steering, rear hitching mechanism and detachable cab.
Made of die cast metal and plastic. Nicely detailed model with lots of realistic features.
Approx size: 22 x 11 x 9 cm
Cattle Trailer & Cows 1:32
This cattle trailer is ideal for taking your cattle to market, or just moving them around the farm.
It comes complete with a ramp with safety rails that can be lowered to allow the two fresian cows - that are included- on board.
Fits onto the back of all our 1:32 scale Land Rovers (except the Series 1) and tractors.
Approx size: 19 x 7.5 x 10 cm
Cattle Trailer 1:32
This Ifor Williams cattle and livestock trailer is ideal for taking your cattle, sheep, pigs, goats - anything - to market, or just moving them around the farm.
Has a towing hitch that allows it to fit on to the back of all our 1:32 scale Land Rovers and tractors in this section.
Features include a twin axle, a hinged rear loading ramp and safety rails. Diecast metal and plastic construction.
Approx...
Claas Ares Tractor 1:32
A Claas Ares 697 tractor in the 1:32 scale. Diecast metal and plastic.
Complete with front and rear hitches, steering that can be operated with the drivers cab still in place and opening bonnet.
Approximate dimensions: 17 x 7 x 10 cm
Suitable for next day express delivery.
Claas Axion 850 Radio Controlled Tractor 1:32
Well detailed die cast metal Claas Axion 850 2.4 GHz radio controlled tractor.
There are lots of features including proportional speed and steering functions, front and rear lights that are permanently switched on during operation plus a newly designed handset.
Approx size: 20 x 11 x 9.5 cm
Claas Tractor with Frontloader 1:32
The Claas Tractor with Frontloader dose everything another tractor does. But with the front loader you can use it to also move things on to trailers, anything from mud to plant waste.
Measurements: 23 x 7 x 10cm
Die cast metal and plastic detailed model.
Combination Disc Harrow / Cultivator 1:32
The Combination Disc Harrow / Cultivator over turns the soil so the farmer can sow some seeds for his crop. It doesn't just turn over soil it also creates little channels for the seeds to grow in for a smart looking field. It can also fold up for easy transport.
Measurements: 25 x 20 x 4cm
Made of diecast metal and plastic.
Scale: 1:32
Combination Seed Drill 1:32
This is a combination of a seed drill, a disk harrow and a rake. Everything you need to planting the seeds.
It features folding ladder access, folding guides and an opening seed hopper. It can be raised up for travelling along the roads.
Scale 1:32
Made of die cast metal & plastic.
(Tractor not included)
Combine Header Trailer 1:32
This is a trailer for your combine headers, so that they can be moved safely along the roads. Combines have different headers for different crops.
Ideal for any of our 1:32 scale Britains combines.
Diecast metal & plastic.
Approx size: 25 x 8 x 3 cm
Compact Disc Cultivator 1:32
The Compact Disc Cultivator helps prepare the land/soil for new seeds to be sowed. This gets rid of large stones or clods of soil.
Measurements:
10 x 8 x 4cm
Made of diecast metal and plastic.
Crop Sprayer 1:32
Crop Sprayers are used to apply Pesticides, Herbicides and Fertilisers to crops in fields.
This crop sprayer has extendable arms and can be used with other 1:32 tractors.
Diecast metal and plastic.
Approx size: 22 x 9 x 9 cm
Cultivator 1:32
The Simba Solo 330 cultivator is a fully featured tillage train - which means you only have to go over the field once to turn the soil from stubble to a seed bed, ready for the next planting.
Suitable for all our 1:32 scale tractors. Die Cast Metal and Plastic
Approx size: 27.5 x 11 x 4 cm
Disc Harrow 1:32
The disc harrow is used in the fields to break up the big lumps of earth and make a fine bed to plant the seeds in. This harrow folds the outer disc sets so that it fits through gateways and long the narrow roads. It has 4 fixed and 4 folding disc sets.
Measurements: 16.7 x 10.5 x 4.8 cm
Made of diecast metal and plastic.
Scale: 1:32
Tractor not included but available separately.
Twitter
Facebook
Our Blog